eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
1
13
151
A New Hybrid Parallel Simulated Annealing Algorithm for Travelling Salesman Problem with Multiple Transporters
parham azimi
p.azimi@yahoo.com
1
Ramtin Rooeinfar
r_roeinfar@yahoo.com
2
Hani Pourvaziri
hani.pourvaziri@yahoo.com
3
Assistant Professor, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Msc, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Msc, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
In today’s competitive transportation systems, passengers search to find traveling agencies that are able to serve them efficiently considering both traveling time and transportation costs. In this paper, we present a new model for the traveling salesman problem with multiple transporters (TSPMT). In the proposed model, which is more applicable than the traditional versions, each city has different transporting vehicles and the cost of travel through each city is dependent on the transporting vehicles type. The aim is to determine an optimal sequence of visited cities with minimum traveling times by available transporting vehicles within a limited budget. First, the mathematical model of TSPMT is presented. Next, since the problem is NP-hard, a new hybrid parallel simulated annealing algorithm with a new coding scheme is proposed. To analyze the performance of the proposed algorithm, 50 numerical examples with different budget types are examined and solved using the algorithm. The computational results of these comparisons show that the algorithm is an excellent approach in speed and solution quality.
http://www.qjie.ir/article_151_c2e8cb76330e16ca6d662435d7b514fd.pdf
Traveling salesman problem
Transporter vehicles
Budget constraint
Mathematical Programming
Simulated annealing algorithm
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
15
25
152
A Bi-objective Pre-emption Multi-mode Resource Constrained Project Scheduling Problem with due Dates in the Activities
zahra Sadat Hosseini
zahra.hosseini46@yahoo.com
1
Javad Hassan pour
2
Emad Roghanian
3
MSc, Department of industrial Engineering, K.N. Toosi University of Technology, Tehran, Iran
MSc, Department of industrial Engineering, Mazandaran University of Science and Technology, Mazandaran, Iran
Assistant professor, Department of industrial Engineering , K.N. Toosi University of Technology, Tehran, Iran
In this paper, a novel mathematical model for a preemption multi-mode multi-objective resource-constrained project scheduling problem with distinct due dates and positive and negative cash flows is presented. Although optimization of bi-objective problems with due dates is an essential feature of real projects, little effort has been made in studying the P-MMRCPSP while due dates are included in the activities. This paper tries to bridge this gap by studying tardiness MMRCPSP, in which the objective is to minimize total weighted tardiness and to maximize the net present value (NPV). In order to solve the given problem, we introduced a Non-dominated Ranking Genetic Algorithm (NRGA) and Non-Dominated Sort Genetic Algorithm (NSGA-II). Since the effectiveness of most meta-heuristic algorithms significantly depends on choosing the proper parameters. A Taguchi experimental design method was applied to set and estimate the proper values of GAs parameters for improving their performances. To prove the efficiency of our proposed meta-heuristic algorithms, a number of test problems taken from the project scheduling problem library (PSPLIB) were solved. The computational results show that the proposed NSGA-II outperforms the NRGA.
http://www.qjie.ir/article_152_05fece0a7b6447e234c9442943bcc6f1.pdf
Multi-objective Project Scheduling
Resource Constraint
Preemption
Net Present Value
Meta-heuristic Algorithm
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
27
35
153
The Effects of Grasp Conditions on Maximal Acceptable Combined Forces (pushing and pinch forces) for Manual Insertion of Snap Fasteners
Hamed Salmanzadeh
h.salmanzadeh@kntu.ac.ir
1
Kurt Landau
landa@ergonomia.de
2
Assistant Professor, Khaje Nasir Toosi University of Technology, Department of Industrial Engineering, Tehran, Iran
Professor, Darmstadt University of Technology, Institute of Ergonomics, Petersenstraße 30, 64287 Darmstadt, Germany
The objective of this study was to determine the effects of grasp conditions (types of grasp, grasp width, glove and types of coupling) on maximal pushing force (MPF) and required pinch force (RPF) during snap fit assembly. The results indicated that the type of grasp, the type of coupling and wearing gloves have significant (p
http://www.qjie.ir/article_153_29dcf127e50be536b57b167cd9d0f9f5.pdf
Snap fit
Pinch-Push force
Grasp conditions
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
37
45
154
A Bi-objective Optimization for Vendor Managed Inventory Model
Amir Hossein Niknamfar
niknamfar@yahoo.com
1
Seyed Hamid Reza Pasandideh
pasandid@yahoo.com
2
MSc, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Assistant Professor, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin,
Vendor managed inventory is a continuous replenishment program that is designed to provide major cost saving benefits for both vendors and retailers. Previous research on this area mainly included single objective optimization models where the objective is to minimize the total supply chain costs or to maximize the total supply chain benefits. This paper presents a bi-objective mathematical model for single-manufacture multi-retailer with multi-product in order to maximize their benefits. It is assumed that demand is a decreasing and convex function of the retail price. In this paper, common replenishment cycle is considered for the manufacturer and its retailers. Then, the proposed model converts to the single-objective optimization problem using a weighted sum method. A genetic algorithm (GA) is applied to solve it and response surface methodology is employed to tune the GA parameters. Finally, several numerical examples are investigated to demonstrate the applicability of the proposed model and solution approach.
http://www.qjie.ir/article_154_60edd2d22992833e7fe788b5bd6f6c1d.pdf
Bi-objective optimization
vendor managed inventory
Genetic Algorithm
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
47
53
155
Exact Mixed Integer Programming for Integrated Scheduling and Process Planning in Flexible Environment
Mohammad Saidi Mehrabad
1
Saeed Zarghami
2
Professor, university of science and technology, Tehran, Iran
MSc. , university of science and technology, Tehran, Iran
This paper presented a mixed integer programming for integrated scheduling and process planning. The presented process plan included some orders with precedence relations similar to Multiple Traveling Salesman Problem (MTSP), which was categorized as an NP-hard problem. These types of problems are also called advanced planning because of simultaneously determining the appropriate sequence and minimizing makespan in the process of scheduling. There are alternative machines for each operation and different sequences for each order, which create a flexible environment for production planning. In process planning ansd integrated scheduling, most mathematical models have two sets of ordered pairs with precedence or non-precedence relations between operations; therefore, these models cannot be solved using optimization software. Therefore, in this paper, this problem was modeled by a new approach and solved by GAMS software. The model was validated by the existing data in the literature.
http://www.qjie.ir/article_155_6cca3c27a9a83a59477dd63a5aa01b9a.pdf
Integrated scheduling and process planning
Makespan
Flexible manufacturing
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
55
63
156
Measuring and Analyzing the Bullwhip Effect in a Two-Product and Two Echelon Supply Chain Using Control Theory Approach
Ahmad Sadeghi
a.sadeghi@qiau.ac.ir
1
Assistant Professor, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Coordination is very important in supply chain management and it is one of the main factors in supply chain profitability. Bullwhip effect is one of the basic obstacles to achieve coordination in supply chains and reduction of this phenomenon has an important role in supply chain harmony. The other side, costs of supply chain can be mitigated and customer service level can be increased by reducing of bullwhip effect. Because measurement of bullwhip effect is very important in analysing and controlling of it, providing equations to investigate bullwhip effect behaviour based on real world supply chain conditions is necessary. The previous studies mostly concentrate on single product supply chain and few studies have been done on supply chains with more than one product. Here we quantify and investigate the bullwhip effect in a two-echelon supply chain with two products using control theory approach. Due to the relationship between demands of two products in our proposed supply chain, first order vector auto regressive model is used as demand process of the products. We also apply moving average method for lead-time demand forecasting within the "order up to" replenishment policy. We derive a closed form bullwhip measure and then bullwhip effect in a two-product supply chain is discussed and illustrated through a numerical example.
http://www.qjie.ir/article_156_dd7abdaa43974d924eb1a8ea26cc76a1.pdf
Bullwhip Effect
Order-Up-To Policy
Supply Chain
System Engineering
Vector Auto Regressive Model
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
65
75
157
A Tunned-parameter Hybrid Algorithm for Dynamic Facility Layout Problem with Budget Constraint using GA and SAA
Hani Pourvaziri
hani.pourvaziri@yahoo.com
1
Parham Azimi
p.azimi@yahoo.com
2
MSc, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
Assistant Professor, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
A facility layout problem is concerned with determining the best position of departments, cells, or machines on the plant. An efficient layout contributes to the overall efficiency of operations. It’s been proved that, when system characteristics change, it can cause a significant increase in material handling cost. Consequently, the efficiency of the current layout decreases or is lost and it does necessitate rearrangement. On the other hand, the rearrangement of the workstations may burden a lot of expenses on the system. The problem that considers balance between material handling cost and the rearrangement cost is known as the Dynamic Facility Layout Problem (DFLP). The objective of a DFLP is to find the best layout for the company facilities in each period of planning horizon considering the rearrangement costs. Due to the complex structure of the problem, there are few researches in the literature which tried to find near optimum solutions for DFLP with budget constraint. In this paper, a new heuristic approach has been developed by combining Genetic Algorithm (GA) and Parallel Simulated Annealing Algorithm (PSAA) which is the main contribution of the current study. The results of applying the proposed algorithm were tested over a wide range of test problems taken from the literature. The results show efficiency of the hybrid algorithm GA- to solve the Dynamic Facility Layout Problem with Budget Constraint (DFLPBC).
http://www.qjie.ir/article_157_8d39ca2ab6c279dde3712fad1b4ee449.pdf
Dynamic Facility Layout Problem
Budget constraint
Genetic Algorithm
Parallel Simulated annealing algorithm
eng
QIAU
Journal of Optimization in Industrial Engineering
2251-9904
2423-3935
2014-09-10
7
15
77
83
158
A Heuristic Algorithm for Nonlinear Lexicography Goal Programming with an Efficient Initial Solution
Mahdi Bashiri
bashiri.m@gmail.com
1
Amir Hossein Parsa Manesh
2
Hamid Hasanzadeh
h.hasanzadeh@shahed.ac.ir
3
Assistant Professor, IE department, Shahed University, Qom Highway, Tehran, Iran
MSc, Shahed University, Tehran, Iran
MSc, Shahed University, Tehran, Iran
In this paper, a heuristic algorithm is proposed in order to solve a nonlinear lexicography goal programming (NLGP) by using an efficient initial point. Some numerical experiments showed that the search quality by the proposed heuristic in a multiple objectives problem depends on the initial point features, so in the proposed approach the initial point is retrieved by Data Envelopment Analysis to be selected as an efficient solution. There are some weaknesses in classic NLGP algorithm that lead to trapping into the local optimum, so a simulated annealing concept is implemented during the searching stage to increase the diversity of search in the solution space. Some numerical examples with different sizes were generated and comparison of results confirms that the proposed solution heuristic is more efficient than the classic approach. Moreover the proposed approach was extended for cases with ordinal weights of inputs or outputs. The computational experiments for 5 numerical instances and the statistical analysis indicate that the proposed heuristic algorithm is a robust procedure to find better preferred solution comparing to the classic NLGP.
http://www.qjie.ir/article_158_7dfd794a9dddbc2087d1a629a2de11c6.pdf
Nonlinear goal programming
simulated annealing
Data Envelopment Analysis
Heuristic algorithm
Efficient initial solution